COMPACT-3 is not just a bedplate. Some time ago a hoist was needed in order to work with a bedplate.
With the new system we have an all-in-one bedplate and hoist for any use.
Complete with four pistons with a freight capacity of 3000 Kg and a raisable height of 1.5mts, it is ideal for working with any type of vehicle including 4X4 wheel drives and vans.

The system can be set up on the ground with access ramps or it can be built into the ground with a small inspection pit which we will facilitate, in the latter case without ramps. In both cases, without of any type of installation only a 220 V current.

The equipment is designed to be complemented by two measuring systems:

1. - Made up of a telescopic compass and our measurement logbooks which cover more than 1200 vehicles and which are added to on a yearly basis free of charge. This system comes complete with four very resistant clamps, which do not need to be removed in order to put the vehicle in or take it out, just as it is not necessary to use trestles.

2. - Made up of a complete CONTROL-JET measuring system which has eight simultaneous measuring points for the lower points and a system for the upper points, and M.C. Pherson lateral measuring accessories and with the possibility of measuring up to fifty different points reflected in the technical specifications, which, as in the latter case, we add to on a yearly basis. This system comes complete with arbor clamps and trestles. Apart from assembling the bedplate for you, our technicians carry out a practical mini-course with their own vehicles so that you know to use the equipment to obtain maximun performance.

CHARACTERISTICS:

DIMENSIONS:

STANDARD ACCESSORIES :

FRONTAL AND LATERAL PULL SLIDERS

ADDITIONAL ACCESSORIES :

TRESTLES WITH BARS		ADJUSTABLE CLAMPS

BUILT-IN EQUIPMENT:

CLAMP GAP		HOSEPIPE OUTLET

LINKS: Control-Jet